Conventional Air Atomising Spray Lances
It is important to ensure a balanced air and fluid pressure "at the spray gun".
To assist in achieving this it is advisable to use a mini air regulator - or filter
regulator please see page 9.
38-002
38-220
38-210
38-230
PA131J230
Standard 12" extension
for DeVilbiss JGA/GTi
spray gun with forward,
backward & side spray
360° atomiser nozzle.
EXITFLEX `38' Series Airspray Gun Lances do not feature needles and thus require a different technique in use. In practice,
they provide a positive affordable solution to users where a slim, lightweight extension is required for paint spray or wax
application into difficult to reach areas inside tubes or confined spaces
The Lances are 3mm thick wall aluminium tubing as also used with the EXITFLEX airless spray extension items, this makes it
easy for you to stock for air spray or airless spray applications.
It is important to note that the atomisers detailed in this section are for use in air spray applications only, they are not suitable
for airless Some liquids may not be suitable for use with these atomisers.
It is important to use separate air and fluid control regulators. Pressure feed guns should normally feature a 1.4mm fluid tip,
or a 1.8mm fluid tip. Extensions will only operate with pressure feed.
TYPE REF
DESCRIPTION
38-441
Fogging chamber to fit BRPHVLP gun (page 45)
38-451
Fogging chamber to fit Iwata W90
38-452
Fogging chamber to fit Iwata W200
38-411
Fogging chamber to fit DeVilbiss, Sagola (not HVLP)
38-438
Fogging chamber to fit DeVilbiss, Compact Gun
38-421
Fogging chamber to fit Binks 230
38-431
Fogging chamber to fit Binks BBR
38-471
Fogging chamber (air assisted airless)to fit AAG-2000,
GRACO AA 2000, ALPHA PLUS & AA PLUS
74-021
Adaptor for use with Flexi, 1/2" JIC M x 1/2" JIC M
38-002
Adaptor 1/2" JIC M 1/4" UNF F for use in rigid extensions
38-210
Spinning atomiser, forward, backward and side spray 1/4" UNF
38-220
Spinning atomiser, side spray only 1/4" UNF
38-230
Fixed atomiser for use with flexi lance
32-306/16
Lance 6" length rigid
32-312/16
Lance 12" length rigid
32-318/16
Lance 18" length rigid
32-324/16
Lance 24" length rigid
32-336/16
Lance 36" length rigid
A complete extension comprises 1 Fogging chamber, 1 Lance (length to suit) 1 38-002 adaptor
plus/antomiser of your choice. These extensions require a pressure feed system.
Flexible Extensions -
PA131J230
Flexi lance 1 metre including 38-230 fixed atomiser (excl. fogging chamber)
Flexible extensions are available using the 38-219 or 220 spinning
atomiser with 1/4 bore nylon hose. Prices by enquiry
Slimline Extensions -
38-500
Slimline extension tube only not including nozzle. Accepts 38-210
or 38-220 order fogging chamber extra to suit. Nickel plated finish
18" long, 11mm OD
38-501
Slimline angled fixed fan atomiser complete with fogging chamber
to suit and choice of 6", 12" or 18" length. 11mm OD
